Categories
Environmental Engineering

Discussion of the objectives

The next addition to the PSM Metrics Program is the Metrics Strategy. Here, you want to discuss the goals, objectives and the reasons for selecting the metrics you plan to present as they relate to the strategy behind your proposed Metrics Program. Begin the assignment with a one-paragraph introduction about the Metrics Strategy. An overall metrics strategy, for instance, may include; improving measurement of PSM program effectiveness to provide needed measures to ensure incidents are kept to a minimum so as to restrain costs and enhance stakeholder relations.
This may be a very useful strategy for a large refrigerated storage facility that has had some mishaps in the past couple of years, which ultimately, results in bad press and employees getting sent to the hospital for Ammonia chemical burns. It costs a lot of money to evacuate a facility, and maintaining good standing in the community is very important.
Follow the introduction with the three main sections: goals, objectives, and metrics selection. Once your strategy is complete, you will need to identify goals consistent with your Metrics Program strategy. Make sure you also discuss the rationale for each goal you select as it relates to the overall strategy statement for the Metrics Program. For instance, the goals section should list the goals, and then discuss how each goal is important to the organization and how and why each goal is consistent with the Metrics Program strategy.
One process safety metrics goal with the strategy statement summarized above, for instance, might include; identify overall PSM program costs as compared to benefits. Our metrics, in the present case, would want to focus on measuring the costs and benefits of the various program elements. An objective might be; quantify all outside contractor expenses related to PSM. Another might be: quantify internal labor costs related to PSM program administration. However, it is likely there would have to be quite a few other objectives in order to actually get an estimate of overall costs and benefits for an entire PSM program. This overall effort would be a formidable undertaking.
Finally, identify and describe metrics that would be consistent with your goals and objectives. You had some practice brainstorming some metrics in the previous unit concerning whether the metrics were lagging, leading, outcome, and so on. Here, however, you will need to focus more on your strategy, goals, and objectives to identify appropriate metrics.
Your metrics may be at the overall program level or specific to individual program elements. For instance, if your strategy focuses on reigning in contractors during outages at a large chemical plant, you would want to focus on the contractor requirements of the PSM standard. If your strategy includes a focus on mechanical integrity, you would obviously focus on that part of the standard. Make sure you can measure your objectives. If your strategy focuses more on establishing a facility culture that embraces safety and, more specifically, process safety as a core value, your goals, objectives, and metrics may be more focused on the overall program. This will help reassure top management that commitment, employee involvement, hazard analysis and control, employee training, and other related elements are being measured as they relate to process safety.
As you endeavor to demonstrate how a PSM program is helpful, keep in mind your target audience is skeptical about the value of a PSM program.
This is another piece that will be added to your written document demonstrating how a PSM metrics program is helpful to the organization.
This assignment should meet all of the following criteria:
Introduction to the Metrics Strategy
Goals listed
Discussion of the goals
Objectives listed
Discussion of the objectives
Metrics Selection listed
Discussion of the metrics selection
Also, this should be in APA format, no cover page at this point is required. The reference page is required for any material to include in module reading and/or any other resource(s) that support your objective for this assignment.

Categories
Environmental Engineering

Which search engine provided the most relevant results?

Discussion: Search Results
Use two different search engines to conduct the same search. Pick one of the following phrases to search. Use quotation marks on the words to narrow your search:
“big-box store”
“largest supermarket chain”
“brick and mortar store”
“computers in business”
Search for your chosen phrase using Google. Next, use the same phrase to search on Microsoft Bing. Once you’ve run the same search on the two different engines, compare the results.
Ask yourself these questions for discussion:
Which search engine provided the most relevant results?
How could you narrow your search further using a search engine?
Requirements: Answer each question for the discussion in a minimum of 1 paragraph (100-200 words) Times New Roman Size 12 Font Double-Spaced APA Format Excluding the Title and Reference Pages
Please be sure to carefully follow the instructions
No plagiarism & No Course Hero & No Chegg. The assignment will be checked for originality via the Turnitin plagiarism tool
Please be sure to include at least one in-text citation in each paragraph

Categories
Environmental Engineering

List two types of common filter media

PDF
What are the two controlling factors that dictate ethe length of a filter run (how long a filter can operate before it needs to be backwashed)?
What is the major design and operating parameter for a rapid sand filter? Provide an example of units List two types of common filter media
Briefly describe the three particle transport mechanisms that occur in a sand filter – include what are the main dependencies.
How deep is standard rapid sand bed? (Range in inches)?
What is the typical filter run time for filter (hrs)?
What is a typical terminal headloss for a filter before it needs to be backwashed?

Categories
Environmental Engineering

Trash bins Zoning code for single family and multi-family houses. Solid Waste collections on residential area. How many bins per house hold and bins sized.

Trash bins Zoning code for single family and multi-family houses. Solid Waste collections on residential area. How many bins per house hold and bins sized.
All the zoning code by united state municipality. Please this will be on APA format 2 pages

Categories
Environmental Engineering

M-PESA Mobile.

M-PESA Mobile…Read the PDF guideline…
Task 1 (85%) (2000 words)
This part of the coursework follows on from the work done for assignment 1
Having chosen your innovative/sustainability issue following the work done for the initial presentations you must now investigate the topic in depth.
You are required to produce a report on the topic which details the following:
Definition/explanation/background to the topic
Benefits of its use Challenges to its implementation
Methods of overcoming the challenges
Task 2 (15%) (500 words)
Following the company/site visit, produce an A3 poster detailing what you consider to be the main innovative and sustainable technologies/methods used.
The presentation should make use of pictures taken at the time of the visit, generic images from the internet will not be acceptable. The images should be supported by text which clearly explains the issues and solutions presented during the visit

Categories
Environmental Engineering

Learning Goal: I’m working on a environmental engineering question and need an e

Learning Goal: I’m working on a environmental engineering question and need an explanation and answer to help me learn.Determine groundwater elevations at site monitoring wells and draw groundwaterelevation contours for the Former Radiator Factory site using monitoring well informationand depth to groundwater measurements. Assume depth to groundwater is recorded asdepth from the top of the INNER CASING. Estimate the hydraulic gradient?
Requirements: proper calculation and contour map

Categories
Environmental Engineering

Learning Goal: I’m working on a environmental engineering question and need an e

Learning Goal: I’m working on a environmental engineering question and need an explanation and answer to help me learn.Determine groundwater elevations at site monitoring wells and draw groundwaterelevation contours for the Former Radiator Factory site using monitoring well informationand depth to groundwater measurements. Assume depth to groundwater is recorded asdepth from the top of the INNER CASING. Estimate the hydraulic gradient?
Requirements: detail calculation of each well and contour map

Categories
Environmental Engineering

Learning Goal: I’m working on a environmental engineering question and need an e

Learning Goal: I’m working on a environmental engineering question and need an explanation and answer to help me learn.Determine groundwater elevations at site monitoring wells and draw groundwaterelevation contours for the Former Radiator Factory site using monitoring well informationand depth to groundwater measurements. Assume depth to groundwater is recorded asdepth from the top of the INNER CASING. Estimate the hydraulic gradient?
Requirements: Full contour map and calcultions   |   .doc file

Categories
Environmental Engineering

Learning Goal: I’m working on a environmental engineering writing question and n

Learning Goal: I’m working on a environmental engineering writing question and need an explanation and answer to help me learn.A paper about Plastic Waste in the Ocean The paper should be doublespaced, and prepared in accordance with APA7 guidelines. All references must be cited in your paper.Main ideas should include the definition of the problem? How and why the problem is effecting us and our ecosystem? How could we reduce the problem? what have we done and what should we do?

Categories
Environmental Engineering

Learning Goal: I’m working on a environmental engineering presentation and need

Learning Goal: I’m working on a environmental engineering presentation and need an explanation and answer to help me learn.JI need speaker notes and 6 power point slides . Job description:You will prepare an oral presentation that summarizes your group’s findings on a project lab included in attachments .There is a 5 time limit, and no more than 6 slides are allowed. Students should introduce themselves and their project on the title slide. The presentation will be graded as follows:Content (2 pts)Slide 1. Title of project; team number and names.
Slides 2 – 3. IntroductionClear problem statement / objective for the study.
Motivation statement (reason/justification for the study).
Slides 4 – MethodsSample description and list the treatment methods and analyses you chose to do.
Slides 5 – Key Findings (Results/Discussion)Pick only 3-5 key findings to report (additional details can be in the report)
In tables or figures, show results from statistical analyses, and explain what they imply (and/or what they don’t imply)
Comment on if anything went unexpected during your study
Slides 6. Conclusion and RecommendationsBriefly bullet point the main, overall findings
Provide policy recommendations in layperson terms
State any recommendations for future work
Delivery (2 pts)Presenters speak clearly, are well-prepared, and the presentation is rehearsed
Visual displays, figures, fonts, and text are attractive, clear, and large enough to see
Text is concise and slides are not crowded with words
Information is clearly presented in a logical order